ARESWIN

THK SHS-V SHS-VM

22/04/2025/0 Comments/in THK Linear Guideways/by aresmotion

THK SHS-V / SHS-VM type linear guide is the LM block. THK SHS type linear guide has a smaller width (W) and tapped holes.
SHS-V guides used in places where the space for table width is limited.
Long-term maintenance free,High accuracy,Heavy load,Self-adjusting capability,4-way equal load,Bolts mounted from above
Basic load rating(kN) : Basic dynamic load rating 14.2 to 205 / Basic static load rating 24.2 to 320
Size : 15,20,25,30,35,45,55,65
THK SHS-V / SHS-VM guides are designed to withstand heavy loads and provide long service life. The precision-ground raceways and balls ensure smooth and accurate movement, reducing friction and wear. This results in extended operating life and reduced downtime for maintenance.
Model:SHS 15V SHS 15VM SHS 20V SHS 20VM SHS 25V SHS 25VM SHS 30V SHS 35V SHS 45V SHS 55V SHS 65V

Model No.	Outer dimensions			Basic load rating
	Outer dimensions			Radial
	Height	Width	Length	Dynamic	Static
	M	W	L	rating	rating
				C	C0
	mm	mm	mm	kN	kN
SHS 15V	24	34	64.4	14.2	24.2
SHS 15VM	24	34	64.4	14.2	24.2
SHS 20V	30	44	79	22.3	38.4
SHS 20VM	30	44	79	22.3	38.4
SHS 25V	36	48	92	31.7	52.4
SHS 25VM	36	48	92	31.7	52.4
SHS 30V	42	60	106	44.8	66.6
SHS 35V	48	70	122	62.3	96.6
SHS 45V	60	86	140	82.8	126
SHS 55V	70	100	171	128	197
SHS 65V	90	126	221	205	320

Please place your orders in this manner:Contact Us – ARESWIN (aresmotion.com)

THK HSR Linear Guide

24/09/2024/0 Comments/in THK Linear Guideways/by aresmotion

THK HSR Linear Guide

Models HSR-C/CM
THK HSR Guide is the flange of the LM block has tapped holes. HSR Guide can be mounted from the top or the bottom.
Used in places where the table cannot have through holes for mounting bolts.

High accuracy
Heavy load
Self-adjusting capability
4-way equal load
Flange type
Bolts mounted from above and below
Basic load rating (kN): Basic dynamic load rating 10.9 to 195 / Basic static load rating 15.7 to 228
Size : 15,20,25,30,35,45,55,65
Model NO.:HSR 20C,HSR 20CM,HSR 25C,HSR 25CM,HSR 30C,HSR 30CM,HSR 35C,HSR 35CM,HSR 45C,HSR 55C,HSR 65XC

THK LM guides are designed to withstand heavy loads and provide long service life. The precision-ground raceways and balls ensure smooth and accurate movement, reducing friction and wear. This results in extended operating life and reduced downtime for maintenance.

Please place your orders in this manner:Contact Us – ARESWIN (aresmotion.com)

Model No.	Outer dimensions			Basic load rating
	Outer dimensions			Radial
	Height	Width	Length	Dynamic	Static
	M	W	L	rating	rating
				C	C0
	mm	mm	mm	kN	kN
HSR 15C	24	47	56.6	10.9	15.7
HSR 15CM	24	47	56.6	10.9	15.7
HSR 20C	30	63	74	19.8	27.4
HSR 20CM	30	63	74	19.8	27.4
HSR 25C	36	70	83.1	27.6	36.4
HSR 25CM	36	70	83.1	27.6	36.4
HSR 30C	42	90	98	40.5	53.7
HSR 30CM	42	90	98	40.5	53.7
HSR 35C	48	100	109.4	53.9	70.2
HSR 35CM	48	100	109.4	53.9	70.2
HSR 45C	60	120	139	82.2	101
HSR 55C	70	140	163	121	146
HSR 65XC	90	170	190.5	195	228

THK HRW-CA Linear Guide

09/08/2024/0 Comments/in THK Linear Guideways/by aresmotion

THK HRW-CA Linear Guide

Model No.	Outer dimensions			Basic load rating
	Outer dimensions			Radial
	Height	Width	Length	Dynamic	Static
	M	W	L	rating	rating
				C	C0
	mm	mm	mm	kN	kN
HRW 17CA	17	60	50.8	5.53	9.1
HRW 17CAM	17	60	50.8	5.53	9.1
HRW 21CA	21	68	58.8	8.02	12.9
HRW 21CAM	21	68	58.8	8.02	12.9
HRW 27CA	27	80	72.8	14.2	21.6
HRW 27CAM	27	80	72.8	14.2	21.6
HRW 35CA	35	120	106.6	33.8	48.6
HRW 35CAM	35	120	106.6	33.8	48.6
HRW 50CA	50	162	140.5	62.4	86.3
HRW 60CA	60	200	158.9	80.3	109

THK HRW Linear Guide is Wide type Rail Model HRW
The flange of this LM block has tapped holes. The HRW Block Can be mounted from the top or the bottom.

Balls roll in four rows of raceways precision-ground on an THK rail and THK block, and endplates incorporated in the LM block allow the balls to circulate.

THK HRW Block Each row of balls is placed at a contact angle of 45°，so that the rated loads applied to the block are uniform in the four directions (radial, reverse radial and lateral directions), enabling the Guide to be used in all orientations.
In addition, the HRW block can receive a well-balanced preload,increasing the rigidity in four directions while maintaining a constant, low friction coeffi cient. In a low center of gravity structure with a large rail width and a low overall height, this model can be used in places where space saving is required or high rigidity against a moment is required even in a single axis confi guration.

THK HRW Linear guide is heavy load. Since the number of effective balls is large, the THK HRW model is highly rigid in all directions.

Model NO.:HRW 17CA,HRW 17CAM,HRW 21CA,HRW 21CAM,HRW 27CA,HRW 27CAM,HRW 35CA,HRW 35CAM,

HRW 50CA,HRW 60CA

Please place your orders in this manner:Contact Us – ARESWIN (aresmotion.com)

THK SRS minature Linear Guide

05/08/2024/0 Comments/in THK Linear Guideways/by aresmotion

THK SRS minature Linear Guide
THK SRS type is the smallest caged ball LM guide and its mounting dimensions are interchangeable with the conventional RSR models.
THK miniature linear guide with compact structure. The minature linear guide can be mounted in areas in space saving areas, and the small linear guide can be achieved the purpose of reducing space and weight.

The SRS type linear guide Use of ball cages eliminates friction between balls and retains lubricant, thus achieving low dust
gen-eration.

Models SRS-S, SRS-M and SRS-N

Model No.	Outer dimensions			LM block dimensions								H3
	Height M	Width W	Length L	B	C	S×ℓ	L1	T	K	N	Lubrication hole d
SRS 5M SRS 5GM	6	12	16.9	8	—	M2×1.5	8.8	1.7	4.5	0.93	0.8	1.5
SRS 5N SRS 5GN	6	12	20.1	8	—	M2×1.5	12	1.7	4.5	0.93	0.8	1.5
SRS 7S SRS 7GS	8	17	19	12	—	M2×2.3	9	3.3	6.7	1.6	1.2	1.3
SRS 7M SRS 7GM	8	17	23.4	12	8	M2×2.3	13.4	3.3	6.7	1.6	1.2	1.3
SRS 7N SRS 7GN	8	17	31	12	13	M2×2.3	21	3.3	6.7	1.6	1.2	1.3
SRS 9XS SRS 9XGS	10	20	21.5	15	—	M3×2.8	10.5	4.5	8.5	2.4	1.6	1.5
SRS 9XM SRS 9XGM	10	20	30.8	15	10	M3×2.8	19.8	4.5	8.5	2.4	1.6	1.5
SRS 9XN SRS 9XGN	10	20	40.8	15	16	M3×2.8	29.8	4.5	8.5	2.4	1.6	1.5
SRS 12S SRS 12GS	13	27	25	20	—	M3×3.2	11.2	5.7	11	3	2	2.1
SRS 12M SRS 12GM	13	27	34.4	20	15	M3×3.2	20.6	5.7	11	3	2	2.1
SRS 12N SRS 12GN	13	27	47.1	20	20	M3×3.2	33.3	5.7	11	3	2	2.1

Since stainless steel is used in the SRS block, SRS linear rail and balls, these models are highly resistant to corrosion and environment.THK SRS linear guide can be stainless steel,which widely used in industry areas.

Model NO.: SRS5M SRS7M SRS9XS SRS12M SRS7S SRS9XS SRS12N

Please place your orders in this manner:Contact Us – ARESWIN (aresmotion.com)

THK SSR-XTB Guide

03/08/2024/0 Comments/in THK Linear Guideways/by aresmotion

THK SSR-XTB Guide

THK SSR-XTB Linear Guide with the flange of the LM block has through holes.Used in places where the table cannot have through holes for mounting bolts. THK SSR linar guide rail is long-term maintenance free and high accuracy. THK SSR-XTB Guide way is self-adjusting capability.

THK SSR-XTB guide rails can be customized according to customer’s length requirements.

THK SSR-XTB Block is flange type,this type THK linear guide with Bolts mounted from below.
Basic load rating (kN): Basic dynamic load rating 14.7 to 64.6 / Basic static load rating 16.5 to 71.6
Size : 15,20,25,30,35
Model NO.: SSR 15XTB, SSR 20XTB, SSR 25XTB,SSR 30XTB,SSR 35XTB

THK LM guides are designed to withstand heavy loads and provide long service life. The precision-ground raceways and balls ensure smooth and accurate movement, reducing friction and wear. This results in extended operating life and reduced downtime for maintenance.

Model No.	Outer dimensions			Basic load rating
	Outer dimensions			Radial
	Height	Width	Length	Dynamic	Static
	M	W	L	rating	rating
				C	C0
	mm	mm	mm	kN	kN
SSR 15XTB	24	52	56.9	14.7	16.5
SSR 20XTB	28	59	66.5	19.6	23.4
SSR 25XTB	33	73	83	31.5	36.4
SSR 30XTB	42	90	97	46.5	52.7
SSR 35XTB	48	100	110.9	64.6	71.6

THK SSR-XW Guide

20/04/2024/0 Comments/in THK Linear Guideways/by aresmotion

THK SSR-XW Guide
THK SSR-XW linear guide design with a low sectional height and the ball contact structure at 90° in the radial direction make this model an optimal model for horizontal guide units.

With this type, the LM block has a smaller width (W) and tapped holes. Used in places where the space for the table width is limited

Basic load rating (kN): Basic dynamic load rating 14.7 to 64.6 / Basic static load rating 16.5 to 71.6
Size : 15,20,25,30,35

Model:SSR 15XW, SSR 15XWM, SSR 20XW,SSR 20XWM, SSR 25XW,SSR 25XWM,SSR 30XW,SSR 30XWM,SSR 35XW

THK LM guides are designed to withstand heavy loads and provide long service life. The precision-ground raceways and balls ensure smooth and accurate movement, reducing friction and wear. This results in extended operating life and reduced downtime for maintenance.

Model No.	Outer dimensions			Basic load rating
	Outer dimensions			Radial
	Height	Width	Length	Dynamic	Static
	M	W	L	rating	rating
				C	C0
	mm	mm	mm	kN	kN
SSR 15XW	24	34	56.9	14.7	16.5
SSR 15XWM	24	34	56.9	14.7	16.5
SSR 20XW	28	42	66.5	19.6	23.4
SSR 20XWM	28	42	66.5	19.6	23.4
SSR 25XW	33	48	83	31.5	36.4
SSR 25XWM	33	48	83	31.5	36.4
SSR 30XW	42	60	97	46.5	52.7
SSR 30XWM	42	60	97	46.5	52.7
SSR 35XW	48	70	110.9	64.6	71.6

THK SHS-C Guide

03/04/2024/0 Comments/in THK Linear Guideways/by aresmotion

THK SHS-C Guide

THK SHS-C Linear Guide is the flange type of the LM block has tapped holes.
Can be mounted from the top or the bottom.
Used in places where the table cannot have through holes for mounting bolts.

Basic load rating (kN): Basic dynamic load rating 14.2 to 205 / Basic static load rating 24.2 to 320
Size : 15,20,25,30,35,45,55,65

THK LM guides are designed to withstand heavy loads and provide long service life. The precision-ground raceways and balls ensure smooth and accurate movement, reducing friction and wear. This results in extended operating life and reduced downtime for maintenance.
Model: SHS15C, SHS20C, SHS25C, SHS30C, SHS35C, SHS45C, SHS55C, SHS65C

Model No.	Outer dimensions			Basic load rating
	Outer dimensions			Radial
	Height	Width	Length	Dynamic	Static
	M	W	L	rating	rating
				C	C0
	mm	mm	mm	kN	kN
SHS 15C	24	47	64.4	14.2	24.2
SHS 15CM	24	47	64.4	14.2	24.2
SHS 20C	30	63	79	22.3	38.4
SHS 20CM	30	63	79	22.3	38.4
SHS 25C	36	70	92	31.7	52.4
SHS 25CM	36	70	92	31.7	52.4
SHS 30C	42	90	106	44.8	66.6
SHS 35C	48	100	122	62.3	96.6
SHS 45C	60	120	140	82.8	126
SHS 55C	70	140	171	128	197
SHS 65C	90	170	221	205	320

THK SHS-LV Guide

03/04/2024/0 Comments/in THK Linear Guideways/by aresmotion

THK LM guides are designed to withstand heavy loads and provide long service life. The precision-ground raceways and balls ensure smooth and accurate movement, reducing friction and wear. This results in extended operating life and reduced downtime for maintenance.

The THK LM block has the same cross-sectional shape as model SHS-LV, but has a longer overall LM block length and a greater rated load.

Model No.	Outer dimensions			Basic load rating
	Outer dimensions			Radial
	Height	Width	Length	Dynamic	Static
	M	W	L	rating	rating
				C	C0
	mm	mm	mm	kN	kN
SHS 15LV	24	34	79.4	17.2	31.9
SHS 15LVM	24	34	79.4	17.2	31.9
SHS 20LV	30	44	98	28.1	50.3
SHS 20LVM	30	44	98	28.1	50.3
SHS 25LV	36	48	109	36.8	64.7
SHS 25LVM	36	48	109	36.8	64.7
SHS 30LV	42	60	131	54.2	88.8
SHS 35LV	48	70	152	72.9	127
SHS 45LV	60	86	174	100	166
SHS 55LV	70	100	213	161	259
SHS 65LV	90	126	272	253	408