
The Ball Screw Must Maintain Stability When Moving At Low Speeds
As we all know, mechanical motion is different from human beings. In the case of high mechanical performance, high-speed and effective motion is relatively easy
As we all know, mechanical motion is different from human beings. In the case of high mechanical performance, high-speed and effective motion is relatively easy
Pitch Pitch is the distance between screw threads and is commonly used with inch sized products and specified as threads per inch. Lead Lead is the
Yes! Ball Screws should never be run without lubrication! Ball screw assemblies require proper lubrication to ensure long life and smooth operation. Running without lubrication
The difference between cold rolling screw (rolled screw) and grinding screw is as follows: 1. Different processing methods: Cold-rolled ball screw is to cut grooves
In the working operation, the ball screw will always produce some friction. Under the appearance of these friction forces, the ball screw will wear to
The application of sliding table module has been very common in automation industry, but it may often lead to rusting due to improper use. If
That’s easy – there are more parts. A lead screw is merely a threaded shaft and simple nut. The precision of such a device is
The Constant Section Thin Walled Bearing is a kind of bearing even if the shaft diameter and bearing bore are larger, the cross-section of the thin-walled bearings will remain unchanged, so they are also called equal-section thin-walled bearings.Thin-walled equi-section bearings, also called thin-walled ring bearings, have high precision, very quiet and strong bearing capacity. Thin-walled ring bearings can be deep groove ball
Coupling is an important component in enterprise mechanical transmission, which is widely used in the connection between equipment and reducer or motor. The assembly and
Product Description: SGR series double-axis slide rail: the slide rail with U-shaped cross section is adopted, and the inner side of the slide rail is
The linear module sliding table is an important auxiliary equipment that many automation equipments need to use. The common automation equipments used in linear modules
ARESWIN Relying on years of accumulation and precipitation in the industry, linear modules have achieved energy savings in the mold industry, auto parts industry, home
The linear module was originally invented and used by the Germans. Its wide application worldwide has brought tremendous changes to the automation industry. There are
6. Different axial clearance and preloading methods. Axial clearance is also a very important factor to consider when selecting lead screw, because the existence of
When to use ball screw, When to use trapezoidal screw? How to select ball screw (or trapezoidal screw) and motor according to the requirements of
The coupling is used to connect the two shafts together. The two shafts cannot be separated when the machine is running. The two shafts can
When choosing the linear guide rail of linear module, we should choose the appropriate size according to the working environment, and choose the appropriate product
Inspection and repair of clearance between ball screw nut pair and supporting system. When the numerical control machine tool has large reverse error, unstable positioning
At present, with the high speed of the machine tool industry, the load on the ball screw is increasing, and the high-precision and large-lead screw
Rust treatment and antirust method of linear guide rail. As one of the core components of the equipment, the linear guide rail and the linear
Reasons affecting the normal use of ball screw. One of the reasons for the unsmooth running of the ball screw can be divided into two
1. The accuracy grades of linear guide rail are divided into (walking parallelism, taking the guide rail 100mm long as an example), general grade (unmarked
1. Linear guide rail pair is generally composed of guide rail, slide block, reverser, rolling body and holder, etc. It is a new rolling support
Founded in 2010, Areswin Precision Machinery Co.,Ltd is ISO 9001:2008 certified company and the leading distributor of bearings, motion products and a range of industrial products.We customize products according to customer needs.
Tel: +86-17782970829
Wechat/Skype: 17782970829
Email: [email protected]
Website: http://www.aresmotion.com