Rust treatment and antirust method of linear guide rail. As one of the core components of the equipment, the linear guide rail and the linear shaft play a guiding and supporting role. In order to ensure the high machining accuracy of the machine, it is required that the guide rails and straight lines have high guiding accuracy and good motion stability.
During the operation of the equipment, a large amount of corrosive dust and smoke will be produced during the processing of the machined parts, which will be deposited on the surfaces of guide rails and linear shafts for a long time, which will greatly affect the machining accuracy of the equipment.
And corrosion spots will be formed on the surface of the straight axis of the guide rail, thus shortening the service life of the equipment. In order to make the machine work normally and stably and ensure the processing quality of products, the daily maintenance of guide rails and linear shafts should be done carefully.
Please prepare for cleaning the guide rail-dry cotton cloth and lubricating oil. For example, the guide rail of engraving machine is divided into linear guide rail and roller guide rail. Cleaning of linear guide rail: firstly, move the laser head to the right (or left), find the linear guide rail, wipe it with dry cotton cloth until it is bright and dust-free, add a little lubricating oil (sewing machine oil can be used, but not engine oil), and slowly push the laser head left and right several times, so that the lubricating oil can be evenly distributed.
Cleaning of straight guide rail: move the beam to the inside, open the end covers on both sides of the machine, find the guide rail, wipe the contact areas between the guide rails on both sides and the rollers with dry cotton cloth, and then move the beam to clean the remaining areas. After finishing the use of the linear guide rail, it is necessary to apply anti-rust oil on its surface again.